GE Power PRO Series X600 User Manual page 89

Message
Write Protect !
Card Full !
Memory Full !
Card Error !
Card is not formatted.
Slow access
Cannot write to SD
card.
No Red-Eye Detected!
88
Description
The SD card is locked.
Indicates that the SD card is full.
Indicates that the camera memory is full.
During power-on, the SD card cannot be
recognized or a read/write error occurs.
When an error occurs in the SD card, the
message "Not Formatted" appears.
When a SD card lower than Class 4 is used to
record a HD movie, the writting speed will be
slower and recording will not continue.
The photo shooting or video recording
has been interrupted so recording cannot
continue.
Red eyes have not been detected in the image.
Action
Remove SD card and switch the lever on the side of card
to UNLOCK. The message will disappear after 2 seconds.
Replace SD card with another that has available
memory. The message will disappear after 2 seconds.
It disappears after 2 seconds.
Format the SD card. WARNING: Formatting the SD card
will erase all data on the card. Copy the data from
the SD card to another storage, such as a computer.
Otherwise, all data will be erased after the format.
The message will disappear after 2 seconds.
Format the SD card. WARNING: Formatting the SD card
will erase all data on the card. Copy the data from
the SD card to another storage, such as a computer.
Otherwise, all data will be erased after the format.
The message will disappear after 2 seconds.
Replace SD card with a higher Class over 4. The
message will disappear after 2 seconds.
Turn off the camera. Then unload and reload the SD
card and turn on the camera to retry.
Also check if SD card is full or in a locked position.
The message will disappear after 2 seconds.