Set Eye-Fi Sd Card Connection Mode - GE Power PRO Series X600 User Manual

The video output signal can be switched to NTSC or PAL
to accommodate different regional TV standards. The
appropriate setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania, etc.
Note: The TV output will not display properly if an incorrect
video system is selected.
74

Set Eye-Fi SD Card Connection Mode

This camera supports wireless connection of an Eye-Fi SD
Card. Upload the photos from the camera to the Internet using
the following steps:
. Press the button, press the up/down arrow button to
func
menu
select and press the
2. Press up/down arrow button to select
button or right arrow button to enter the menu.
3. Press the up/down arrow button to select「Eye-Fi」and
press the button or right arrow button to enter the menu.
4. Press the up/down arrow buttons to select「On」or
「Off」and press the
button to enter the menu.
and press the
button to confirm.