Specifications - QSC Q-SYS Core 1000 User Manual

NPIO Specifications
Relay Pins
Maximum Voltage, relative to Ground: 30 V
Maximum Current through Relay: 1 Amp
Power Pins
Output Voltage: 11V min, 13V max
Maximum Output Current: 400 mA
NOTE!: The maximum current sourced by one GPIO connector (including both High Current and Power Pins) is 400 mA.

Specifications

Type 2 System Hardware
Description
Front Panel Controls
Front Panel Card Receptacle
Front Panel Indicators
Rear Panel Connectors
Maximum Ambient Operating Temperature
Capacity
Network Audio Channels In
Network Audio Channels Out
Maximum Channels Out 2
End Node Capacity
Processing (Channels of 32-bit audio)
I/O Capacity
Line Voltage Requirements
Dimensions (HWD)
Accessories Included
Normal Current Pins
Maximum Input Range: 0 V to 32 V
Analog Input Range: 0 V to 24 V
Core 1000 | Core 3000 | Core 4000
System processor and control engine
LCD page forward momentary switch
Unit ID button momentary switch
Clear settings momentary switch
SD (secure digital) standard size media
Power On: Blue LED
Device Status: Tri-color LED
Audio Signal: Five tri-color LEDs
240 x 64 monochrome LCD graphics display
RS-232: DE-9 (male 9-pin D shell connector)
Video Out: HD-15 (female 15-pin D shell connector)
Aux ports AUX A set: USB host x2, RJ45 10/100/1000 MBps
Aux ports AUX B set: USB host x2, RJ45 10/100/1000 MBps
GPIO A: DA-15 (female 15-pin D shell connector)
GPIO B: DA-15 (female 15-pin D shell connector)
Q-Sys Network LAN A: RJ45 1000 MBps only
Q-Sys Network LAN B: RJ45 1000 MBps only
45°C (113°F).
64 128 128 – 512
64 128 2048
1024 2048
128 256 512
128 256 512
Up to 4 channels. Requires purchase of I/O cards
100 VAC – 240 VAC, 50 – 60 Hz
5.25" x 19" x 15" (133.35 mm x 482.6 mm x 381 mm)
6 ft UL/CSA/IEC line cord • User Manual • Software CD •
Optional audio I/O ship kit
14
High Current Pins
Maximum Input Range: 0 V to 32 V
Analog Input Range: 0 V to 24 V
Digital Input, Low: 0.8 V maximum
Digital Input, High: 2.0 V minimum
Digital Output, Low: 0.4 V maximum
Digital Output, High: 2.4 V minimum,
3.3 V maximum
Digital Output Impedance: 1k ohm
High Current Output, Low: 0.4 V maximum
High Current Output, High: 11 V minimum, 13 V maximum
High Current Output, sink or source: 280 mA
I/O Frame
System audio input and output device
LCD page forward momentary switch
Unit ID button momentary switch
Clear settings momentary switch
—
Power On: Blue LED
Device Status: Tri-color LED
Audio Signal: Five tri-color LEDs /per I/O card slot
240 x 64 monochrome LCD graphics display
RS-232: DE-9 (male 9-pin D shell connector)
GPIO A: DA-15 (female 15-pin D shell connector)
Q-Sys Network LAN A: RJ45 1000 MBps only
Q-Sys Network LAN B: RJ45 1000 MBps only
50°C (122°F)
128 – 512 —
1 1
—
—
—
—
Up to 16 channels
100 VAC – 240 VAC, 50 – 60 Hz
1.75" x 19" x 15" (44.45 mm x 482.6 mm x 381 mm)
6 ft UL/CSA/IEC line cord • User Manual • Optional audio I/O
ship kit
3 . Requires purchase of I/O cards.