Configuring Snmp; Snmp Properties; Snmp Configuration; Snmp Trap Configuration - Qlogic SANbox 5800V Series User Manual

4 – Managing Switches

Configuring SNMP

Search List Domain Names
Configuring SNMP
Configuring the Simple Network Management Protocol includes:
SNMP Properties Configuration

SNMP Trap Configuration

SNMP v3 Manager and User Configuration

SNMP Properties

Use the SNMP Properties dialog
parameters. To open the SNMP Properties dialog, select a switch in the topology
display or open the faceplate/backplate display, open the Switch menu, select
SNMP, and select SNMP Properties. After making changes, click the OK button
to put the new values into effect.
NOTE:
Since Read Community, Trap Community, and Write Community settings are
like passwords and are write-only fields, the current settings are displayed as
asterisks.
4-28
Table 4-6. Network Properties — DNS Configuration
Parameter Description
The suffix that is appended to the user-specified host-
name for the search.
(Figure 4-11) to change SNMP configuration
S
59264-02 A