Managing System Services; System Services Dialog - Qlogic SANbox 5800V Series User Manual

A

Managing System Services

The System Services dialog provides a central location for you to enable or
disable any of the external user services such as Simple Network Management
Protocol (SNMP), embedded web applet, command line interface, Network Time
Protocol (NTP), Common Interface Model (CIM), and Call Home. To display the
System Services dialog, open the Switch menu and select Services.
NOTE:
System services requiring you to enter an IP address are dependant on the
settings of the IPv4 Network and IPv6 Network options in the Network
Properties IP dialog. If both options are disabled, all services except
Management Server will be disabled.
CAUTION!
Use caution when disabling the Embedded GUI, GUI Mgmt, and Telnet, as it
is possible to disable all access to the switch except through a serial
connection.
59264-02 A
Figure 4-9 System Services Dialog
4 – Managing Switches
Configuring a Switch
4-21