Qlogic SANbox 5800V Series User Manual page 116

5 – Managing Ports
Port Information Data Window
Device Scan
Auto Performance Tuning
AL Fairness
Port Binding
Upstream ISL
Downstream ISL
Extended Credits Requested
Max Credits Available
Credits to Donate
Donor Group
Valid Donor Groups
Media Type
Media Speed
Media
5-4
Table 5-1. Port Information Data Window Entries (Continued)
Entry
Extended Credits Group
Device scan status. Enabled means the
switch queries the connected device dur-
ing login for FC-4 descriptor information.
Enables the switch to dynamically control
the MFS_Enable, VI_Enable and
LCF_Enable features based on the opera-
tional state of the port.
Controls how frequently the switch can
arbitrate for access. Applies only affects
ports running in loop (FL) mode.
N/A - does not apply to this switch
The ISL over which the switch sends
requests intended for the principal switch
The ISL over which the switch has
received requests intended for the princi-
pal switch.
Number of requested credits
The maximum number of credits granted
to a port that can be used when extending
port credits.
The number of credits available to be
donated by the selected port.
The donor group of the selected port.
The number of separate groups within
which extended credits may be donated
and assigned.
Media Group
The transceiver fibre type, such as single
mode, multi-mode, copper.
The maximum transceiver speed
The transceiver type.
display "unknown", if attached.
S
Description
XPAK
ports always
59264-02 A