Q-See QSDT8PCRP User Manual page 81

S u p e r D V R & 8 P C R P / 8 P C D P / 1 6 P C R P
U s e r M a n u a l
After successfully installing SuperCam software, Click on System Setting (Pic
1), and then enter Server IP address or Domain, User name and password to
log in (Pic 2). If you connect successfully, it will go to Live View of CH1 as
default (Pic 3), You can choose other desired channels from channel button
underneath. Other functions are:
1. : switch channels
2. : picture snap.
3. : ptz control (if server camera is PTZ Camera only) (pic 4)
PTZ Control buttons:
1 : pan
2 : Zoom
3 : Focus.
4 : IRIS
5 : return to live
Zoom in Zoom out
Long Focus Short Focus
Lighter Darker
Q-See
81