Q-See QSDT8PCRP User Manual page 42

Q-See
: Next Frame. This button is valid when playing back by single
•
channel playing back in pause mode
Users can select suitable playing speed in the area as shown below:
The following area shows the recorded files of different channels:
The upper bar shows the hours in a whole day. Click the bar, and it will be
magnified 10 times, therefore users can see the detailed time marks. When
searching for a certain section of the file, users can draw the scrolling-bar to
the area that most likely contains the needed section. If necessary, click the
bar once and see the magnified time marks for precise search.
The left side shows the available channels. When a certain channel has been
selected for playing back, the background color will be highlighted, or it's dark
gray, and a tick sign will appear beside the channel title.
The main area at the center gives details of the recorded files. Different colors
of the bar show the different types of record modes of the files. The following
are the definitions of the color bars:
Blue: Manual Record Events
•
Green: Schedule Record Events
•
Yellow: Motion Detection Record Events
•
Red: Sensor Alarm Record Events
•
Click to play selected recorded files. The system offers playback in
1 Ch, 4CH, 9 CH, and 16CH. The following is the multiple channel playback
options in the control area:
The system default playiback mode is one channel. That is Camera1. If users
need to change to other channels, then click
configuration window will appear, as shown below:
42
S u p e r D V R & 8 P C R P / 8 P C D P / 1 6 P C R P
Figure6-4 Playing Speed Controller
Figure6-5 Recorded Files Browser
Figure6-6 Multiple Channel Playback Control
U s e r M a n u a l
and the channel