Setting A Workout Time Limit; Setting A Pause Time Limit; Viewing The Odometer, Hours Of Use, Software Version And Error Log - Precor EFX546 Owner's Manual

Commercial efx series
Hide thumbs Also See for EFX546:
Table of Contents

Advertisement

C
O
M
M
E
R
C

SETTING A WORKOUT TIME LIMIT

You can limit how long a user works out by setting a duration between 1 and 240
minutes. You can also choose NO LIMIT which allows the user to select a course and
work out indefinitely. (Note that the user must enter a workout time of "0" using the
numeric keys at the Enter Time prompt before he or she can workout indefinitely.)
Important: If the club setting is NO LIMIT and the user enters "0" at the Enter
Time prompt, then the Remaining Time display does not appear when a user
works out. (An exception to this rule is the Weight Loss Course.)
Note: The Quick Start program is set at the Club limit.
Use the
time limit to 20 minutes, the EFX allows users to specify a workout between 1 and 20
minutes. Users would not be allowed to specify a time longer than 20 minutes. Take
into account that the user will get an additional five minute, cool-down period
appended to his or her workout, so adjust the time limit accordingly.
Note: The touch-sensitive keys can be gently pressed and held to view several
selections. The longer the key is held down, the faster the numbers scroll past.

SETTING A PAUSE TIME LIMIT

Use the
minutes). Note that changes to the Pause time become effective only when the
power source for the EFX is the optional battery recharger. If no battery recharger
is connected and the stride rate drops below 40 strides per minute, the EFX
moves into a thirty second shut down mode. Refer to page 24.
VIEWING THE ODOMETER, HOURS OF USE, SOFTWARE
VERSION AND ERROR LOG
The keypad keys that you press to view the odometer, the number of hours the
EFX has been in use, the software version and any error codes, are as follows:
Reset, Resistance
Important: Remember to begin at the Precor banner. After pressing Reset, the
next key in the sequence must be pressed within 1/2 second.
The field name Odometer appears briefly and then the odometer value (the cumu-
lative strides that users have travelled) appears.
Press Enter and the number of hours (Hour Meter) that the unit has been in use
appears. The EFX notes the passing of each 10th of an hour, but the numeric
value that appears is truncated to the nearest full hour.
Press Enter again and the unit's three digit Software Version (upper and lower)
appears on the display.
Press Enter once again and the Error Log appears. Press the
error messages. To return to the Precor banner, press Enter or Reset.
Note: To clear (delete) the error log, press Quick Start for at least four seconds
while viewing the list. Prompts appear on the display and let you know when the
error messages have been deleted ("cleared") from memory.
Important: You cannot retrieve the error log once you have deleted it.
I
A
L
P
R
O
D
keys to select a workout time limit. For example, if you set the workout
keys to set a Pause time limit between 1 and 120 seconds (two
, Resistance
U
C
T
S
D
I
V
or
I
S
I
O
N
key to view the
page 21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents