Hardware Kit - Precor C966i Owner's Manual

C O M M E R C

HARDWARE KIT

After unpacking the treadmill, open the hardware kit and make sure that you have
the following items shown in Diagram 2.
❑ (A) twelve 1-inch buttonhead hex screws
❑ (B) sixteen stainless steel washers — place on 1-inch screws
❑ (C) four
❑ (D) four 3 -inch socket head screws — install upright supports
❑ (E) four black washers — fasteners for upright supports
❑ (F) four barrel spacers — place on 3 -inch socket head screws after washers
❑ (G)
-inch hex key — attach handrails to display frame
❑ (H)
-inch hex key — attach hood, mount upright supports, attach display
and handrails to base frame
❑ (J)
-inch hex key — attach upright supports to base mounting brackets
❑ (K)
-inch hex key — adjust running belt
❑ (L) six cord clips
Hardware kit (not shown to scale).
Diagram 2
A
Note: After assembling the treadmill, be sure to store the hex keys in a secure
place. The tools are used for specific maintenance procedures that are described
in this manual.
I A L P R O D
-inch flat head hex screws — attach to upper handrails
C
D
B
E
L
U C T S D I V
F
G
I S I O N
H
J
K
page 9