Precor C966i Owner's Manual page 31

Commercial treadmill
Hide thumbs Also See for C966i:
Table of Contents

Advertisement

C
O
M
M
E
R
C
Important: As a safety feature, a sharp tug on the security cord that is attached
to the STOP button will cause the running belt to stop. It is a requirement that a
user attach the security clip on his or her clothing while working out. Please refer
to Using the Security Clip on page 33.
SPEED CONTROL ▼▲
belt at the beginning of a program and lets you designate the target speed. During
a workout, the SPEED ▼▲ keys let you increase or decrease the running
belt's speed. Speed changes can range from 0.5 to 16 mph (1 to 25 kph) in 0.1
increments. The speed in the Interval program can be set by the user. The speed of
the running belt can also be modified and limited by the club. Check with the club
manager or refer to Club Information on page 21.
Note: When you press the SPEED ▼▲ key, the number that appears on the
display shows the target speed and may differ slightly from the actual speed
because the display can change much faster than the running belt. Eventually,
the two meet at the target speed.
Another feature of the SPEED ▼▲ keys lets you review the treadmill's speed
and pace any time during your workout. If SPEED and/or PACE is not one of the
chosen features being displayed, you can view the speed of the running belt and
your pace by lightly touching the SPEED ▼ or ▲ key. A 2-second display lets
you review your speed and pace. You can opt to change the speed, if you hold the
key down for a few more seconds.
Note: The numeric keys can also be used to adjust the speed. Please refer to
Numeric Keys above.
QUICKSTART: This key lets you bypass the Setup prompts and start your work-
out immediately using the Manual program. Default values apply.
QUICKSTART Default Values
Prompts
Program
Time
Weight
Age
I
A
L
P
R
O
D
▼▲
▼▲
▼▲: The SPEED ▲ key initiates the movement of the running
▼▲
Default Value
Manual
The Club limit. Weight Loss program is fixed at 28 minutes.
150 lbs. (68 kg.)
0 : An Age entry must occur to utilize the SmartRate
If QUICKSTART is pressed after an Age is entered, then the
SmartRate
®
display will appear when you hold onto the heart
rate touch-sensitive grips on the handrail or wear the POLAR
chest strap. If no Age entry occurs, the SmartRate
lights up, but no blinking sensor appears.
U
C
T
S
D
I
V
I
S
I
O
N
®
display.
®
®
display
page 31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents