Press The I1_ Button - Zenith Z50PX2D Installation And Operating Manual, Warranty

Ot;_eration
0- Lets you choose the way an anatog picture with a 4:3 aspect ratio is displayed on your TV wffh a 16:9 ratio picture format.
When you receive an analog picture with a 4;3 aspect ratio on your 16:9 TV_ you need to specify how the picture is to be dis-
played,
o If you are viewing a picture with a 16:9 aspect ratio, you _n't use the Hodzon aspect ratio option.
- Hodzon aspect ratio is not avaBabJe for Component 1-2(480p/720p/1080i)IRGB-DTV (480p/720p/lO80i)/HDMVDVFDTV (720p/1080i)
/DTV(720p/1060i) input s_rce.
In RGB-PC/DVI-PC input source, only effher 4:3 or 16:9 aspect ratio is available.
- Note: ff a fixed image ie displayed on the screen for a long time, the image may become imprinted on the screen and remain
visible+
1. Press the RATIO button repeatedly to select the desired picture format.
You can also adjust Asp_ Ratio in the OPTION menu.
- _ By Program
Choose the pro_r picture proportion to match the source's image. (4:3 -_ 4:& 16:9 -_ 16:9)
• 4;3
Choose 4_3 when you want to view a picture with an original 4:3 aspect ratJo_ with gray bars appearing _ both
the Jeft and right sides.
• 16_9
Choose 1_9 when you want to adjust the picture horizontally in a linear proportion to fin the entire screen
• Horizon
Choose Horizon when you want to adjust the picture in a non4inear proportion, that is, more enlarged at both
sides, to create a spectacular view,
o Zoom !
Choose Zoom ! when you want to view the picture without any alteration, Howeve£ the top and bottom portions
of the picture will be cropped,
• Zoom
2
Choose Zoom 2 Wen you want the picture to be aJtered, both vertically extended and cropped, The picture tak-
ing a haffway trade off between afferation and screen coverage
• Cinema Zoom
Choose Cinema Zoom when you want to enlarge the picture in correct propor_on. Note: When enlarging or
reducing the picture size, the image may become distorted.
You can adjust the enlarge proportion of Cinema Zoom using & _V button, The _us_nt range is 1~16,
Most movies are 24 frames/sec, but TV signal is 30 framesisec
This option lets the TV do 3:2 puIFdown operation for you to watch
movies at the beet motion appearance.
1. Press the MENU button and then use A tV button to select the OPTION menu.
2. Press the I1_ button _ then use A / V button to select C_rhen-_ &2_
3, Press the I_ button ar_ then use A _V button to seiect On or
4, Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu,
Note: This feature operates onty in Component 480i, S-Video_ Video mode.
32 Plasma 7q/