Configuring Settings Specific To An Individual Input Source (Option Menu) - Yamaha RX-V471 Owner's Manual

Av
Hide thumbs Also See for RX-V471:
Table of Contents

Advertisement

ENTER
RETURN
Depending
on the input source, configure settings for the function
related to playback.
An operation for settings is possible with only
the front display without using a TV monitor. Therefore, settings can
be changed
easily as needed.
• To operate
the "Option"
menu
on the TV monitor,
connect
the unit and a TV with an
HDMI cable,
and change
the input source
on the TV to the video input from HDMI
OUT jack of the unit before
operation.
Press OPTION.
Front display
TV monitor
Press the cursor keys (A/v)
to select the desired
setting, and then press ENTER.
• Press RETURN to return to the previous screen.
3
Press the cursor keys (<lIE>) to adjust the setting.
4
Press OPTION to finish the setting.
Available
settings
in Option
menu
• Only the available settings that can be applied to the selected input are displayed.
Tone Control
Adjusts the high-frequency
range and low-
57
frequency
range of sounds.
Sets whether dynamic
range (from maximum
Adaptive
DRC
to minimum)
is adjusted
automatically
in
57
conjunction
with adjusting the volume level.
Enhancer
Enables/disables
Compressed
Music
57
Enhancer.
Volume
Trim
Adjusts the differences
of the volume levels
57
when switching
the input source.
Signal
Info
Displays information
on the current video and
58
audio signal.
Audio
In
Combines
video from the selected
input
22
source with audio input from other jacks.
Combines
audio of the TUNER or USB input
Video Out
42, 55
with video from other input.
Auto Preset
Registers FM stations with strong signals
38
automatically
in the preset numbers
(up to 40).
Clear Preset
Deletes the registered
stations.
40
(U.K. and Europe models only) Automatically
Traffic Program
searches
for traffic information with the Radio
41
Data System.
Sets repeat playback
of an iPod or USB
Repeat
device.
48, 54
Shuffle
Sets shuffle playback
of an iPod.
48
Sets whether or not to charge an iPod while
58
Standby
Charge
the unit is in standby mode.
Sets whether operations for the iPod
iPod Interlock
connected
to the iPod wireless audio receiver
59
are in conjunction
with operations
for the unit.
Pairs Bluetooth devices
with the Bluetooth
Pairing
wireless audio receiver.
50
Connects
or disconnects
a wireless
Connect/
connection
between
Bluetooth devices with
51
Disconnect
the Bluetooth wireless
audio receiver.
En
56

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents