Adding Items - Whirlpool GU940SCGZ1 Use And Care Manual

ii! ilIIII llili IiIIilIi!i!i!i¸2 Ii Iii ! !i
i_,_!!_ i i_I_S;_ ,,i_j_ ,__,,,_ O,_iiiii_;!_iii ii,"S
Use a delayed start to run the dishwasher
during off-peak hours to reduce energy
usage or to reduce daytime heat buildup in
your home.
1. Close door firmly until it latches.
4_
If desired, press one or more Option
pads.
The Delay Hours indicator
stays on until the wash cycle
begins.
To cancel delay and start the
dishwasher:
2.
Press the Delay Hours pad once for a
2-hour delay start, twice for 4
hours, or three times for 6
hours. The indicator will glow.
1. Press Delay Hours until the 6 glows.
2. Press Delay Hours one
more time. The delayed cycle
starts.
3. Press a Cycle pad. The Delay Start
_L_ ountdown begins when you
press the Cycle pad. If you
don't press a Cycle pad within
30 seconds, the Delay Hours
indicator turns off.
To cancel delay and cycle:
1. Press Cancel/Drain. The Delay Hours
indicator will turn off.
2. Press new Cycle and Option
pads.
NOTE: You can add items to the load any-
time during the delay countdown. After
adding items, close the door firmly until it
latches. The delay countdown will not con-
tinue if the door is not latched.
18