Whirlpool GU940SCGZ1 Use And Care Manual page 13

Keeptherinseagentdispenser filledwitha
liquidrinseagent. A rinseagentgreatly
improvesdish drying by helpingwater
flow off duringthe last rinse.A rinse
agentalsokeepswaterfromforming
droplets anddrying as spotsor streaks.
A smallamount o f rinseagentautomatically
releases intotherinsewaterduringthefinal
rinseof eachcycle.Forbestdrying
results,checkdispenserperiodicallyto
seeif it needsfilling.
To check dispenser:
• Check center of Fill Indicator Cap. Clear
means it needs filling.
OR
• Remove Fill Indicator Cap. An "E" is visible
when dispenser is empty.
To fill dispenser:
The rinse agent dispenser holds 6 ounces
(175 mL). Under normal conditions, this
lasts about 3 months.
1. Open dishwasher door completely.
2. Remove Fill Indicator Cap.
3. Add rinse agent. Fill to smallest opening
in lower part of dispenser only. Overfilling
may cause rinse agent to leak out. This
will not harm the dishwasher, but could
cause oversudsing.
4. Clean up any spilled rinse agent with
a damp cloth.
5. Replace Fill Indicator Cap. Keep it
closed tightly.
Cap center clear
when empty
Do not fill past
smallest opening
NOTE: You do not have to wait until the
dispenser is empty before refilling, but do
not overfill it. Your dishwasher is designed
to use a liquid rinse agent. You do not need
to use a solid or bar-type rinse agent.
Keep dispenser filled for best drying results
13