Fujitsu Inverter ASTG09JECA Operating Manual page 15

CLEANING AND CARE
Air Cleaning Filter Installation
1. Open the Intake Grille and remove the Air
¿ lters.
2. Attach the air cleaning ¿ lter to the frame
of the front panel.
Attach the ¿ lter on the inside of the tabs (6 places) so as
not to stick out.
Air cleaning ¿ lter frame
Tabs (6 places)
(In the above ¿ gure, the intake grille is omitted for the
explanation)
3. Install the 2 Air filters and close the
Intake Grille.
Do not operate the air conditioner with being opened the
intake grille.
When air cleaning ¿ lters are used, the effect will increased
by setting the fan speed to "High".
Replacing dirty Air cleaning ¿ lters
Replace ¿ lters with the following components (purchased sep-
arately).
● POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR-FA16
● Negative air ions deodorizing ¿ lter: UTR-FA16-2
1. Open the Intake Grille and remove the Air
¿ lters.
2. Remove the air cleaning ¿ lters attached
to the frames of the front panel.
Air cleaning ¿ lter frame
3. Replace them by 2 new Air cleaning
¿ lters.
(1) Remove the old air cleaning ¿ lters in reverse order of
their installation.
Air Clean-
ing Filter Tabs
(6 places)
Air Cleaning Filter
(2) Install in the same way as for installation of the air
cleaning ¿ lter set.
4. Install the 2 Air filters and close the
Intake Grille.
Do not operate the air conditioner with being opened
the intake grille.
About the Air Cleaning Filters
POLYPHENOL CATECHIN AIR CLEANING FILTER (1 sheet)
● The Air Cleaning Filters are disposable ¿ lters. (They can not
be washed and reused.)
● For storage of the Air Cleaning Filters, use the filters as
soon as possible after opening the package.
(The air cleaning effect decreases when the ¿ lters are left in
the opened package)
● Generally, the filters should be exchanged about every 3
months.
Please purchase delicated air cleaning filters (UTR-FA16:
sold separately) to exchange the used dirty air cleaning ¿ lter.
[Negative air ions deodorizing ¿ lter (1 sheet) — light blue]
● The ¿ lter should be exchanged about every 3 years so as
to maintain the deodorizing effect.
● Filter frame is not a one-off product.
Please purchase delicated deodorizing ¿ lter (UTR-FA16-2:
sold separately) when exchanging the ¿ lter.
Maintenance of Deodorizing Filters
In order to maintain the deodorizing effect, please clean the
¿ lter in the follow way once 3 months.
(1) Remove the deodorizing ¿ lter.
(2) Clean with water and dry in the air.
a. Flush the ¿ lter with high-pressure hot water until the
surface of the filter is covered with water. Please
À ush with diluent neutral detergent.
Never wash by reaming or rubbing, otherwise it
will damage the deodorizing effect.
b. Rinse with water À ow.
c. Dry in shade.
Reinstall the deodorizing ¿ lter.
Filter Indicator Reset (The special setting)
Can be used if set correctly during installation.
Please consult authorized service personnel when using this func-
tion.
• It lights on when it is time to clean the air ¿ lters.
Clean the ¿ lter referring to "CLEANING AND CARE".
After cleaning, press the MANUAL AUTO button (Fig.2 2 )
for 2 seconds or less on the indoor unit.
● Indicator Lamp
OPERATION
TIMER
ECONOMY
: Flashing : OFF
15