FujiFilm Finepix S6800 series Owner's Manual page 59

■ P ■
P BEST FRAME CAPTURE
BEST FRAME CAPTURE
The camera takes a series of pictures, starting
before and ending after the shutter button is
pressed. To choose the frame rate and number
of shots:
1
Press the selector right when the
camera is in shooting mode.
2
Highlight the current frame rate and
press the selector right, then press
selector up or down to choose a
new value and press MENU/OK to se-
lect.
c
Some frame rates may reduce the number of shots
available in Step 3.
I Continuous Shooting (Burst Mode)
3
Highlight the number of
shots and press the selec-
tor right. Press the selector
up or down to choose the
number of shots in each
burst and left or right to
choose their distribution
(the number on the left is
taken before and the num-
ber on the right after the
shutter button is pressed).
Press MENU/OK when set-
tings are complete.
4
Press DISP/BACK to return to shooting
mode.
Shots per burst
CONTINUOUS SHOOTING SETUP
–1S SHUTTER 1S
10 FRAMES
SET CANCEL
Distribution
47