External Flash; K Custom Set; Ovf/Lcd Setting - FujiFilm X20 Owner's Manual

g EXTERNAL FLASH

EXTERNAL FLASH

g
Choose ON when using an optional flash unit (ex-
cept Fujifilm products) mounted on the camera
hot shoe.
c
• The flash may not fully light the subject at speeds
faster than 1 / s.
1000
• Use auto or custom white balance (P 54).
• If the built-in flash is raised when ON is selected for
g EXTERNAL FLASH, the built-in flash will fire once
to provide a signal for the optional flash unit to fire.
• External flash units can be used in P, S, A, M, and C1/
C2 modes.
• Fujifilm external flash units do not require this setting.
a
• The camera can be used with flash units that provide
aperture adjustment, external metering, and sensitiv-
ity control. Some flash units that are designed spe-
cifically for other cameras can not be used.
• For information on Fujifilm external flash units, see
Accessories from FUJIFILM (P 117).
96
[OFF] [OFF]

K CUSTOM SET

CUSTOM SET
K
Save settings for P, S, A, and M mode (P 31).
a OVF/LCD SETTING

OVF/LCD SETTING

a
Toggle between the optical viewfinder and LCD
monitor (P 7).
Option Option
EYE SENSOR EYE SENSOR
LCD LCD
OVF OVF
Using the Menus: Shooting Mode
[EYE SENSOR] [EYE SENSOR]
Description Description
Automatic display selection using the
eye sensor.
The view through the lens is dis-
played in the LCD monitor.
The view through the lens is dis-
played in the optical viewfinder.