Disp. Custom Setting; I Flash - FujiFilm X20 Owner's Manual

v DISP. CUSTOM SETTING

DISP. CUSTOM SETTING

v
Enable or disable the focus area display in the op-
tical viewfinder and choose the items displayed in
the LCD monitor. The LCD monitor can display the
following items:
FRAMING GUIDLINE*
AF DISTANCE INDICATOR
WHITE BALANCE
HISTOGRAM
IMAGE SIZE/QUALITY
PHOTOMETRY
FILM SIMULATION
EXP. COMPENSATION
* You can also select the grid type (P 109).
See pages 7 – 9 for the locations of these items in
the displays.
ELECTRONIC LEVEL
MF DISTANCE INDICATOR
APERTURE/S-SPEED/ISO
FRAMES REMAINING
BATTERY LEVEL
FLASH
DYNAMIC RANGE
Using the Menus: Shooting Mode
Virtual Horizon
Selecting ELECTRONIC LEVEL
displays a virtual horizon. The
camera is level when the two
lines overlap.
1
The virtual horizon may not be displayed if the cam-
era lens is pointed up or down.

I FLASH

FLASH
I
Adjust flash brightness. Choose from values be-
tween + EV and – EV. The default setting is ±0.
2 / 2 /
3 3
Note that the desired results may not be achieved
depending on shooting conditions and the dis-
tance to the subject.
P
[±0] [±0]
95