Foxconn 915M07 series User Manual page 42

3
3
Chapter
This chapter tells how to change system settings through
the BIOS Setup menus. Detailed descriptions of the BIOS pa-
rameters are also provided.
You have to run the Setup Program when the following cases
occur:
1. An error message appears on the screen during the system
T-- This page is intentionally left blank
POST process.
2. You want to change the default CMOS settings.
This chapter includes the following information:
Enter BIOS Setup
Main Menu
Standard CMOS Features
BIOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor/User Password
Save & Exit Setup
Exit Without Saving
--his