Display; 8060A Display - Fluke 8060A Instruction Manual

8060A
Instruction Manual
Table 2-1. Controls, Indicators and Connectors (cont)
Item
No.
10 Tilt Bail
11 Power Switch
12

Display

2-7. Display

The 8060A provides measurement results on the 4½ digit LCD display (refer
to Figure 2-4 or your instrument). The decimal point is placed automatically.
Symbols in the upper portion of the display indicate when one of the
secondary functions is enabled. The unit for the autoranging frequency
measurement is displayed automatically as Hz or kHz. The units for all the
other measurements are indicated by the range switch that is pushed in.
Leading zeros are not displayed.
dB Function in Use
Frequency Unit
(Hz or kHz)
Low Battery
Indicator
2-8
Name
A fold-out stand. The bail may also be
removed (press on one of the legs at the
hinge of the bail) and reinserted from the top
as a hook for hanging the instrument.
Slide switch for turning instrument on or off.
4½ digit LCD display (19999 maximum) with
decimal point, minus sign, over-range, Hz,
dB, continuity and relative indicators.
Figure 2-4. 8060A Display
Continuity
Visible Continuity
Indicator
Function
Enabled
Audible
Continuity
Enabled
Relative
Function
in Use
dx06f.eps