Inputs - Fluke 43B User Manual

Inputs

INPUT 1: Use the red test lead on input 1 (
COM : Use the black test lead on the COM input (
Use these inputs for all voltage measurements, and for Ohm, continuity, diode
capacitance and temperature measurements.
The Fluke 43B common inputs
and black COM input) are connected internally via self-recovering fault
protection.
INPUT 2: Use the i-400s AC current probe on input 2 (
This input is mainly used for current measurements. Use the BB120 banana-to-
BNC adapter to connect the current probe.
If you use other test leads or probes, change the probe settings in the
instrument setup menu (see "Selecting Probes").
Figure 4. Measurement Connections
(red INPUT 1 shield, gray INPUT 2 shield,
Note
Introducing the Fluke 43B
).
COM).
1
Inputs
).
7