Range Hood Use - Whirlpool GZ7730XGS1 Installation Instructions And Use & Care Manual

Front trim kits for matching the front panel to your range or
cooktop color are available from your dealer.
For ordering information see the "Assistance or Service" section.
For 30" (76.2 cm) model series
KWVU205:
Part No. 4360201 (white)
Part No. 4360203 (black)
Part No. 4392855 (biscuit)
For 36" (91.4 cm) model series
KWVU265:
Part No. 4360202 (white)
Part No. 4360204 (black)
Part No. 4392856 (biscuit)
For 30" (76.2 cm) model series
GZ7730:
Part No. 4396067 (white)
Part No. 4396066 (black)
Part No. 8171368 (biscuit)
IH5302:
Part No. 4396844 (white)
For 36" (91.4 cm) model series
GZ7736:
Part No. 4396069 (white)
Part No. 4396068 (black)
Part No. 8171369 (biscuit)
Install Front Trim Kit
1. Pull out on the range hood for easier access to the screws.
2. Remove the 3 mounting screws directly behind the front
panel, and remove the front panel from the range hood.
A. Three mounting screws
3. Remove existing trim piece and insert new trim piece.
4. Reattach front panel using the 3 mounting screws.
5. Push the range hood back in.
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before
cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.
_ t,j %xf %,1%_ %1_,,,1÷@
A
B
A. Light button
B. Speed buttons
Operating the Fan
1. Slide the shelf forward.
2. Press the speed buttons for the desired speed.
Speed may be increased, decreased, or turned off at anytime
during the vent hood operation. The indicator light next to the
speed button selected should be on when the fan is running.
3. Press the 0 button or close the shelf to shut off the fan.
The fan will shut off when the shelf is about 2" (5.1 cm) from
the closed position. When the shelf is opened the fan will
operate at the last setting.
Operating the Light
1. Open the shelf about 1" (2.5 cm).
2. Press the light button.
The light will be on each time the shelf is opened. The light
can be used for a night light by opening the shelf about
1" (2.5 cm).
3. Press the light button to turn off the light.
Another option for turning off the vent hood light is to close
the shelf.
12