Advertisement
Available languages
Available languages
• Useonlyrecommended
attachments
and replacement
parts t oavoid c reating
a hazard and/or voiding warranty.
• Maintain theunit a ccording torecom-
mended procedures.
• Useonly forjobs explained intheOP-
ERATION
section ofthismanual.
BLOWER
SAFETY
• Use only in daylight
or in good artificial
light.
• Inspect
the area before
using the unit.
Remove
all debris
and hard
objects
such as rocks, glass, wire, etc., that can
ricochet,
be thrown, or otherwise
cause
injury or damage
during operation.
• Avoid accidental
starting.
Be sure the
switch
is in the OFF position
and keep
your hand
and fingers
away
from the
switch
while connecting
the unit to the
power
source
or when
carrying
a unit
connected
to the power source.
• Never
run the unit without
the proper
equipment
attached.
When
used as a
blower, always install a blower tube. Use
only
recommended
attachments.
Do
not use with any opening
blocked,
Keep
free of dust, lint, hair and anything
that
may reduce
air flow.
• To avoid spreading
fire, do not use blow-
er near leaf or brush
fires, fireplaces,
barbecue
pits, ashtrays,
etc.
• Never place objects
inside the blower
tubes; always
direct the blowing debris
away from people,
animals,
glass, and
solid
objects
such
as trees,
automo-
biles, walls,
etc.
The force
of air can
cause rocks, dirt, or sticks to be thrown
or to ricochet
which can hurt people or
animals,
break
glass,
or cause
other
damage.
• Never use for spreading
chemicals,
fer-
tilizers, or any other substances
which
may contain
toxic materials.
STANDARDS
This product is listed by Underwriters
Lab-
oratories,
Inc.,
in accordance
with
UL
Standard
1017.
If situations
occur which are not covered
in this manual,
use care and good judg-
ment.
If you
need
assistance,
contact
your
authorized
service
dealer
or call
1-800-554-6723.
Failure
to follow
all
Safe_
Rules and Precautions
can result
in serious
injury.
SAVE THESE INSTRUCTIONS
_L, WARNING:
Stop the unit and dis-
connect
from the power
source
before
opening the vacuum
inlet cover. The mo-
tor must
be stopped
and the impeller
blades
no longer turning to avoid serious
injury from the rotating blades.
A0& WARNING:
If received
assembled,
ensure
your
unit is properly
assembled
and all fasteners
are secure.
• A standard
screwdriver
is required
for
assembly.
Your blower
can also
be used
as a
vacuum
by purchasing
an optional
vacuum
kit (Model
No. EBVA
1910).
Contact
your
authorized
service
dealer
for details,
BLOWER
TUBE
ASSEMBLY
1. Align the grooves
on the blower
tube
with the grooves
on the blower
outlet.
2. Push the blower tube onto the blower
outlet until it snaps
into place (tube is
secured
by red tube release
button).
3. To remove the blower tube, press the
tube
release
button
while
pulling
on
tube.
( _._Tube
Release Button
_('_'_\
_
Blower Tube
Blower outlet
SELECT
AN EXTENSION
CORD
Use only a 120 A.C. voltage
supply
as
shown
on nameplate
of the unit to
power
your blower.
• To reduce
the risk of electrical
shock,
this equipment
has a polarized
plug
(one blade is wider than the other) and
will require the use of a polarized
extension
cord. The appliance
plug will
fit into a polarized
extension
cord only
one way. If the plug does not fit fully
into the extension
cord, reverse
the
plug. If the plug still does not fit, obtain
a correct polarized
extension
cord. A
polarized
extension
cord will require
the use of a polarized
wall outlet. This
plug will fit into the polarized
wall outlet
only one way. If plug does not fit fully
into the wall outlet, reverse
the plug. If
it still does not fit, contact
a qualified
electrician
to install the proper wall
Advertisement
