Viewing Information On The Vms Tab; All Table And All Map Views - Extreme Networks Ridgeline Guide Manual

11
Figure 129: Detach a VPP from a Policy
4 Deselect the policies you want to detach from the VPP.
5 Click Save changes. The dialog box opens and shows the successful results of the operation.
6 Click Close to return to the list of VPPs.

Viewing Information on the VMs Tab

After successfully discovering VMs and enabling VM Tracking on the switches, Ridgeline shows the
mapping between the VMs and the devices they access. All associated policies are listed.
This section describes the various views you can use to see a VM and the associated policies and
devices.

All Table and All Map Views

In All table and All map views, the VMs Tab lists all VMs that are part of the discovered VMMs and
Resource Pools. These do not need to be accessing a device. This is the only view in which you can see
all the VMs.
You can filter the contents in Table view by expanding the Filter box and entering text and search
criteria, or by expanding the Quick Filter box and selecting an available quick filter. Table view has the
following columns to describe a VM:
Ridgeline Concepts and Solutions Guide
169