Policy Match Condition Combinations; Creating A Virtual-Port Profile - Extreme Networks Ridgeline Guide Manual

Policy Match Condition Combinations

Table 4 lists the ingress and policy match condition combinations for Extreme Network Virtualization.
The following items provide additional information about the match conditions:
EXOS dynamically inserts the Source MAC in the ingress policy. It does not allow you to add a
●
source MAC in the ingress policy.
EXOS dynamically inserts the Destination MAC in the egress policy It does not allow you to add a
●
Destination MAC in an egress policy.
Table 4: XNV Policy with Wide-key Mode (Default XNV Policy)
Ingress Source IP
Source MAC
DMAC
Dest IP
protocol
source-port
dest-port
tcp-flags
vlan-ID
dot1p
ip-tos
Ethertype
Egress
SourceMAC
DestMAC
ethernet-type
vlan-id
dot1p

Creating a Virtual-Port Profile

To associate a VM with a policy, you first need to create a VPP.
To create a VPP, do the following:
Ridgeline Concepts and Solutions Guide
11
159