Supplying Power To The Summit Wm3700 Wireless Lan Controller - Extreme Networks Summit WM3700 Installation Manual

Supplying Power to the Summit WM3700
wireless LAN controller
1 Plug an approved AC power cord into the power connector at the back of the
Summit WM3700 wireless LAN controller.
2 Plug the cord into a standard AC outlet with a voltage range of 100 to 240 VAC.
.
WARNING!
An improper shutdown can render the Summit WM3700 wireless LAN controller inoperable such
that it could require service by Extreme Networks Support. Do not remove AC power without first
following the shutdown procedure. An abrupt loss of power can corrupt the information stored on
the device.
Summit WM3700 Wireless LAN Controller Installation Guide
25