Connecting Usb Devices - Extreme Networks Summit WM3700 Installation Manual

Connecting USB Devices

The Summit WM3700 wireless LAN controller contains two USB ports for connecting
USB flash storage devices to the controller. The controller can use the USB flash storage
devices for file transfers and firmware updates. Follow the setup instructions below to
connect the devices to the controller and then access those devices through the Web UI
or Command Line Interface.
1 Connect the USB flash drive to either of the USB ports.
2 Wait a few seconds for the drive to be recognized by the controller.
3 Follow the instructions in the Summit WM3000 Series Controller System Reference Guide
or Summit WM3000 Series Controller CLI Reference Guide for more information on
accessing USB storage devices from the controller for file transfers or firmware
updates.
Summit WM3700 Wireless LAN Controller Installation Guide
21