Transporting - Exmark Lazer Z Operator's Manual

Set throttle to "midway" position. Pull outward on the switch to the "ROTATE"
position. Accelerate to full throttle to begin mowing.
4.3.5 Stopping PTO: Set throttle to the "midway" position. Push in on the switch to the
"STOP" position stopping the PTO.
4.3.6 Stopping Engine: Bring unit to a full stop. Disengage the PTO, move motion
control levers out to the neutral lock position and set parking brake.
Before stopping the engine, place the throttle control midway between the "slow"
and "fast" positions. Allow the engine to run a minimum of 15 seconds; then
stop the engine.
Rotate ignition switch to "OFF" position. Remove the key to prevent children or
other unauthorized persons from starting engine.
Close fuel shut-off valve when machine will not be used for a few days, when
transporting, and when the unit is parked inside a building.

4.4 TRANSPORTING

4.4.1 Transporting a Unit: Use a heavy-duty trailer or truck to transport the machine. Lock
brake and block wheels. Securely fasten the machine to the trailer or truck with
straps, chains, cable, or ropes. Be sure that the trailer or truck has all necessary
lighting and marking as required by law. Secure a trailer with a safety chain.
POTENTIAL HAZARD
This unit does not have proper turn signals, lights,
reflective markings, or a slow moving vehicle emblem.
These items are required to drive on a public street or
roadway.
WHAT CAN HAPPEN
Driving on a street or roadway without such equipment
is dangerous and can lead to accidents causing
personal injury.
Driving on a street or roadway without such equipment
may also be a violation of State laws and the operator
may be subject to traffic tickets and/or fines.
HOW TO AVOID THE HAZARD
Do not drive a unit on a public street or roadway.
CAUTION
- 24 -