Mower Deck - Exmark TURF TRACER HP Parts Manual

Item Part No. Description
1 1-414387 Shield, Belt (1-413101-01) W/Decals .................
2 1-323385 Knob................................................................
3 1-323417 Washer ..............................................................
4 1-414310 Wld, Support (1-412110-01)
W/Bushings & Decals ................................ 1
5 1-413425 Spacer, Front Deck Support...............................
6 1-513336 Bushing, Deck Support ................................
7 302-61 Zerk, 45° 1/4-28.................................................
8 1-323539 Spacer...............................................................
9 1-413525 Link, Deck Support ............................................
10 323-7 Screw, HH 3/8-16 x 1 1/4................................
11 3219-3 Nut, Hex 3/8-24 .................................................
12 32120-33 Ring, Retaining ..................................................
13 1-806009 Hairpin, Cotter #206................................4
14 302-52 Zerk, 1/8-27 Str..................................................
15 323-6 Screw, HH 3/8-16 x 1................................ 2
16 3253-5 Washer, Lock 3/8 Heavy................................
17 1-373034 Washer ..............................................................
18 1-303514 Bearing, Flange .................................................
19 3217-9 Nut, Hex 1/2-13 .................................................
20 3253-7 Washer, Lock 1/2...............................................
21 1-522143-01 Wld, Caster........................................................
22 325-20 Screw, HH 1/2-13 x 6................................ 2
23 3290-357 Nut, Whizlock 3/8-16................................ 1 7
24 98-5975 Washer, Spring Disk 3/8 ................................
25 103-1026 Screw, HH 5/8-11 x 1 G8 ................................
26 1-513208 Washer, Spring Disk 5/8 ................................
27 103-2431-01 Wld, Discharge Chute................................ 1
28 1-413093 Belt, Deck Drive.................................................
29 103-3330 Spring, Extension ..............................................
30 3296-39 Nut, Nyloc 3/8-16...............................................
31 3256-4 Washer, 3/8 Std.................................................
32 1-513034 Pivot Bearing .....................................................
33 302-40 Zerk, 90° 1/4-28.................................................
34 3234-11 Screw, HH FLG 3/8-16 x 1................................
35 3256-24 Washer, 3/8 SAE ...............................................
36 1-413099 Pulley, Idler........................................................
37 1-412398 Wld, Arm (1-412394-03) W/Bushings.................
38 1-603384 Bushing, Idler Pivot............................................
39 1-613098 Pulley, Idler........................................................
40 1-413113 Bushing, Idler.....................................................
41 3296-29 Nut, Nyloc 5/16-18 .............................................
Exmark red touch up spray paint - P/N 1-850337.
G
Kit 103-4051 includes antiscalp roller, spacer, & mounting hardware.
H Link assembly nominal length is 6.89" (or approximately 6 7/8") between center of ball joint and center of furthest hole.
See diagram on next page. Initially adjust both links to this dimension, then adjust to where both links are equally
supporting rear of mower deck by lengthening one link and shortening the other by an equal amount.
s
Complete cutter housings also include items 25 & 26.
l Requires installation of Micro-Mulch accessory for proper mulching. Mulch kit P/N's MK363(36").
: Apply Mobil HTS grease (P/N 103-5217 1.5 oz packet) (or a food-grade anti-sieze) between the spindles & bearings and
spindles & sheaves and under top bearing guard. DO NOT use a copper or nickel based anti-sieze.
Units have been built with two versions of the wheel and tire assembly (Kit 103-2171 services both versions). Some components
are not interchangeable between versions.
S Component required for caster assembly version "A", which can be
identified by the following:
1) One sidewall of the tire is stamped "Made in the USA".
2) Front caster spacer (item 74) is yellow plated.
3) Caster bushings (item 75) have a groove in the outer face.

48" MOWER DECK

Qty. Item Part No.
1 42 32128-20
4 43 322-5
4 44 1-603001
45 1-806332
46 322-2
2 47 1-414384
2
2 48 1-522480-01
2 49 1-613204
2 50 323-13
26 51 1-800805
2 52u 1-603299
2 53 99-2842
54 1-513809
2 55 1-603050
56 323-9
2 57H 1-414521
6 58 103-2970-01
4 59 3256-3
2 60 1-800017
2 61 1-611216
2 62 103-0321
63 3217-46
64 103-2802
15 65: 1-413424
3 66: 103-1330
3 67 103-2547
68s 103-3207
1 69 103-2171
1 70 103-2535
19 71: 103-2788
1 72 1-807268
2 73 103-6583
l
1 103-6581
1 103-2507
3 103-1577
1 103-6336
1 74S 103-2169
6
1 1-513547
2 75S 103-2170
6
2 1-513810
8
6 Component required for caster assembly version "B", which can
be identified by the following:
1) Sidewalls of tire are not stamped with "Made in the USA".
2) Front caster spacer (item 74) is unplated.
3) Caster bushings (item 75) do not have a groove inouter face.
5
Description
Nut, Whizlock 5/16-18 ................................
Screw, HH 5/16-18 x 1 ................................
Rod, Deck Support ............................................
Rollpin, 1/4 x 1 1/2.............................................
Screw, HH 5/16-18 x 5/8................................
Wld, Deck (1-412106-01) W/Decals,
Discharge Baffle & Support Rods ......................
Baffle, Discharge ...............................................
Balljoint .............................................................
Screw, HH 3/8-16 x 2 3/4................................
Screw, HH 3/8-16 x 3 1/2 G8.............................
Roller, Antiscalp ................................................
Spacer...............................................................
Bearing. Roller Bearing ................................
Bushing Spacer .................................................
Screw, HH 3/8-16x1 3/4 ................................
Link, Assembly ..................................................
Shield, Belt ........................................................
Washer, 5/16 Std...............................................
Bolt, HH 5/16-18 x 3 1/4 Tap .............................
Kit, Link Assembly .............................................
Asm, Deck Complete................................ 1
Nut, HH 3/4-16 Heavy ................................
Washer, Spring Disc 3/4................................
Sheave W/ Hub .................................................
Guard, Bearing Top ................................3
Asm, Cutter Housing W/Bearings ......................
Asm, Cutter Housing Complete .........................
Kit, Tire & Wheel Asm W/Spacer .......................
Spacer, Guard Bottom................................
Shaft, Spindle....................................................
Key, Machine 1/4 x 3/16 x 1 ..............................
Blade, 16.25 Notched ................................ 3
Blade, 16.25 Mulching ................................
Blade, 16.25 Low Lift ................................ 3
Blade, 16.25 Solid .............................................
Blade, 16.25 Extreme ................................ 3
Spacer (Yellow Plated) ................................
Spacer (Unplated) .............................................
Bushing (Groove In Outer Face)........................
Bushing (No Groove In Outer Face) ..................
Qty.
3
2
2
2
3
1
1
2
2
1
4
4
2
2
2
2
2
6
2
2
3
3
3
2
2
2
3
3
3
3
3
2
2
4
4