Advertisement
If you select "Cable" as input signal in Antenna item, allows you to select
Cable System among: Auto, STD, IRC and HRC.
Use • button to highlight the "Start to Scan", then press • button
to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
Favorite
Allows you to add these channels which you desired as the favorite channels.
Use •
or •
button to highlight the "Favorite" item, then press
•
button
to enter into the following menu.
Use •
and
• button to highlight the desired item, then press OK
button to add or remove the highlighted channel as favorite.
Show / Hide
Allows you to show or hide the channels.
Use •
or •
button to highlight the "Show / Hide" item, then press •
button to enter into the following menu.
Use • and •
button to highlight the desired item, then press OK
button to show or hide the highlighted channel.
Channel No.
Press
•
button to Show and select the channel.
Channel Label
Allows you to setup a label for the channel.
Press • button to select the position of the table, and press • and •
button to select the words.
DTV Signal
Show the quality of digital signal: good, Normal, Bad.
26
Advertisement
