Page 1
ORE; N o ooY, ,NNov ,,oN 22" I080p LCD Television LC22VF59 (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air"...
Contents Contents Caution Safety Information Unit and Accessories Product Feature Introduction 1. Front View 2. Rear View 3. Remote Control Connection 9-11 Basic Operation 12-13 OSD Menu 14-20 1. Picture menu 2. Audio menu 3. Time menu 4. Setup menu 5.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle...
Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor •...
Unit and Accessories and Product Feature Unit and Accessories TV set User's Manual Remote control User's manual Mains Cable Batteries: 2xAA Product Feature - Inputs: RF, VIDEO, VGA, YPbPr, HDMI - Audio Input: AVAudio R/L, PC Audio - Support TV mode: NTSC-M, ATSC - Search TV: Auto/Manual - Auto-shutting down...
Introduction Introduction 1. Front View ooooo' U CH- VOL- VOL+ TV/AV P o Led Indicator {ioo 0 Remote Control window ======== (Keep clear) 1. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off. Indicator on(Red) Standby mode Power on mode...
Introduction 2. Rear View ° I i° 8 SWITCH 1 AC POWER IN HDMI VIDEO audi°inl I I , IAUdi°inl 1. AC POWER IN: Connect to an earth 100-240V,50-60Hz AC outlet with the Power Cable. 2. HDMI: Connect it to the HDMI of DVD or other equipment. 3.
Introduction 3. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AA size batteries observing the polarity markings inside the battery compartment. Don't mix different types or used batteries with new ones. 3.
Connection Connection Power Cord Connection °1I° IDDB DIIDDB DIIDDB D - Connect the power cord correctly as shown with the mains cable, and turn the switch (Page 6) - When you connect the power, the TV set comes into standby mode and the LED indicator (Page 5) lights red.
Page 11
Connection AV Input Connection Note: All cables shown are not included with the TV. HDMI VIDEO audio in RCA Video Cable RCAAudio Cable h_==:= L__ _:o_ DVD or VCR YPbPr Connection Note: All cables shown are not included with the TV. /L_ _ _._ _¸...
Connection HDMI Connection Note: All cables shown are not included with the TV. HDMI VIDEO audio in Audio in DVDorVCR PC Connection Note: All cables shown are not included with the TV. HDMI VIDEO Audio in If using a sound card, adjust the _Supported PC resolutions_ PC sound as required.
Basic O_eration Basic Operation Power on/off 1. Connect to the power with a power code, and turn on the switch(page9). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control.
Page 14
Use < / > button to select the main menu, and press V button to enter the submenu. In the submenu, use A / V button to select the function item, and you could: adjust ("Contrast" item in Picture menu for example) with <...
OSD Menu OSD Menu 1. Picture menu Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture.
OSD Menu 2. Audio menu Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity.
OSD Menu 3. Time menu Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, deactivate this function. Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: Modify date and time.
OSD Menu 4. Setup menu Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle.
OSD Menu 5. Lock menu You must enter the password to gain access to the Lock menu. The default password is 0000. You may modify the following options: Change password: Change the password, you must enter the new password twice to confirm it.
OSD Menu 6. Channel menu COLOR TV BROADCASTING SYSTEM AZORES(PORTUGAL) BALKANS(KOSOVO, BOSNIA) BELGIUM/GERMANY/ITALY IRAQ SECAM AFGHANISTAN NETHERLANDS/NORWAY SECAM SAUDIARABIA KUWAIT/TURKEY/JORDAN UNITED KINGDOM CZECH/HUNGARY/POLAND RUSSIA SECAM U.S.A./JAPAN/KOREA/GUAM NTSC Air/Cable: Allow you to select antenna between Air and Cable. If you selet "Cable", the following items(Favorite, Show/Hide, Channel...
OSD Menu Show/Hide: Allow you to show or hide the channels. Use A / V button to highlight the desired item, then press OK button to show or hide the highlighted channel. Channel No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel.
Sim_le Troubleshootin_ Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance.
Technical ,S_ec_cations Technical Specifications 21.6 inch(diagonal) 300 cd/m 2 1000:1 1920x1080 AC100-240V 50/60Hz The cabinet design and electronics specifications will be modified without prior notice for improving the performance.
Page 24
AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. VIORE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT; EXCEPT TO THE EXTTENT PROHIBITED...