Boot Other Device
With the option set to
first/second/third boot devices fail.
Boot Up NumLock Status
This option allows you to select the power-on state of
activate the keyboard
the
key.
NumLock
Security Option
The Security Options allows you to require a password every time the system
boots or only when you enter setup. Select
access to the CMOS Setup screen. Select
access the CMOS Setup screen and when the system boots.
APIC Mode
Use this function to enable or disable the Advanced Programmable Interrupt
Controller (APIC). If you disable this option, you also disable the MPS Version
Control for OS option.
MPS Version Control For OS
Use this function to select the Multi-Processor Specification (MPS) version that
BIOS passes to the operating system. Use the
scroll through the options.
Full Screen LOGO Show
This option allows you to enable or disable the display of the full-screen logo
when the system boots. Use the
between
Enable
, the system boots from some other device if the
Enable
when the system is started. Select
NumLock
Page Up
and
Disable
. Select
NumLock
to require a password to gain
Setup
to require a password to
System
and
Page Up
Page Down
and
keys to toggle
Page Down
to
On
to disable
Off
keys to
37
EVGA