Toshiba CF27H40 Owner's Manual page 14

Programming Channel Memory (Continued)
CHANNEL •/•
r_ POWER
MENU TV/VIDEO VOLUME
G OGQ®G
=----------4 --,--T --A
MENU <VII, •/A
After performing the CH PROGRAM function, you can add or erase
specific channels.
1
Select the channel you want to erase using the CHANNEL • or •
button, or select the channel you want to add using the Channel
Number buttons.
</k
2 Press MENU repeatedly until the Setup
menu is displayed on the screen.
3 Press • or • until "ADD/ERASE" is
displayed in purple.
RECALL MUTE
(_ (_) _)R 1 4 Press< orl_
Press the button until "ERASE" is dis-
O O O _ played in purple indicating that the
Channel channel has been erased from the
,+, o Jl
Number memory.
,o.dd+.ch.nn,,,
Press the button until "ADD" is displayed
in purple indicating that the channel has
been memorized.
CHANNEL
5 Repeat steps 1 to 4 for other channels.
_,:;_!; _;_;._: : ;_!_ [ EP, A SE ]
TO SELECT ITBll PUSH • •
TO CONTROL PUSH••
TO SELECT ITEM PUSH • •
TO CONTROL PUSH • •
You have now completed the channel programming.
1
CABLE channel reference chart
COlTespond-
ins CABLE
channel
Correspond-
Ing CABLE
channel
A_8 5(A-7}6(A-6) A B C .................--_ V W AA BB ......... XX YY ZZ AAA BBB 65 66
67 68 69 ..................92 93 94 A-5 A-4 A-3 A-2 Aol 100 101 102--123 124 125
The above chart is typical of many cable system channel allocations. If in doubt, consult your cable company.
14