Programming Channel Memory - Toshiba CF27H40 Owner's Manual

Programming Channel Memory
The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL • or • button.
First, use the TVICABLE and CH PROGRAM functions to preset all active channels in your area.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
CHANNEL •/•
A
MENU W/VIDEO VOLUME ICHANNELI
® OQ®Q®
,D,_-.---- 4 --II.--T --A
MENU _ •/•
POWER
POWER
3
MENU
RECALL MUTE POWER
®®®
®®@
@®®
FAV CH TVNIDEC
r-_ r-rl r-_
SLOW PAUSE _ FF
_ .,÷
TOSHIBA
_POWER
CHANNEL
JJV
Press POWER to turn on the "IV.
Press MENU repeatedly until the Setup
menu is displayed on the screen.
Press • or • repeatedly until "TV/
CABLE" is displayed in purple.
4
Press _1or• until the mode that corre-
sponds to your TV signal system is
displayed in purple.
TV: TV broadcasts signals.
(VHF channels 2 through 13 and UHF
channels 14 through 69)
CABLE: Cable TV signals.
(Cable channels 1 through 125)
1
Press MENU repeatedly until the Setup
TO SELECT ITIE34 pIJ6H • •
TO CONTROL PUSH _111_
menu is displayed on the screen.
2
Press • or • repeatedly until "CH PRO-
GRAM" is displayed in purple.
CH PROGRAM
,_ / ,_:.-'_,_3_ i._._! _:;_:,_;
t_?_ L :..";L
TO SELECT ITl_l _ • •
TO G_NTROt. PUSH <1 I_
3
Press < or • to start channel program-
ming.
The TV will automatically cycle through
all the TV or CABLE channels depending
on the mode selected, and store active
channels in the channel memory.
4 When channel programming is complete,
you will see the message at the right.
CH PROGRAM
TV
4
24
CH PROGRAMM I NG
COVIPLETED
TV 4
5 Press CHANNEL • or • to make sure the channel programming has
been done properly.
.=°
€
13