Toshiba TP55G65 Owner's Manual page 6

I _ INTRODUCTION
Antenna/Cable TV
Connections
• You can use either an indoor or outdoor antenna to receive VHF and UHF channels.
• Channels 2-13 are VHF channels, and channels 14-69 are UHF channels.
• We recommend using an outdoor antenna for better picture quality.
• You can receive Cable TV by connecting the cable supplied by your local cable
company.
.
Types of antenna cables
Shown below are two basic types of antenna cables.
Signals from a home antenna may be conveyed by either type. Cable TV
signals will always be conveyed by a 75 ohm coaxial cable.
(_ A 75 ohm coaxial cable is generally a round cable with F-type
connectors that can easily be attached to a terminal without tools.
F-type connector (Not supplied)
(_ A 300 ohm cable is a flat ';twin-lead" cable that can be attached to a
terminal using an antenna adapter.(Not supplied)
( C-C ;=:=
3====
o
.P
Antenna connection panel
There are two separate 75 ohm F-type connector input terminals and a
converter output terminal as shown below.
TV rear
ANT( 75 -q )
@ @@
ANT-1 OUT A'XtT-2
The ANT-1 and ANT-2 terminals are for connecl:ing a VHF/UHF antenna
or cable TV system. The signal input through ANT-1 is also output from
the OUT terminal whenever the RF switch on the TV is in the ANT-2
position. You can switch between the _ANT-1 and ANT-2 inputs in the
ANT 1/2 menu or with the ANT/VIDEO button on the TV. See page 21.
6