Advertisement
I
_
INTRODUCTION
Antenna/CableTV
Connections
• You can use either an indoor or outdoor
antenna to receive VHF and UHF channels.
• Channels 2--13 are VHF channels,
and channels
14-69 are UHF channels.
• We recommend
using an outdoor
.antenna for better picture quality.
• You can receive Cable TV by connecting
the cable supplied
by your local cable
company.
Types of antenna
cables
Shown below are two basic types of antenna cables.
Signals from a home antenna may be conveyed
by eithertype.
Cable TV
:signals will always be conveyed
by a 75 ohm coaxial cable.
I_ A 75 ohm coaxial cable is generally
a round (:able with F-type
connectors
that can easily be attached to a terminal
without
tools.
F-type connector
(Not supplied)
(2_ A 300 ohm cable is a flat "twin-lead"
cable tFat can be attached to a
terminal
using the supplied
antenna adapter.
___====
Antenna
connection
panel
There are two separate 75 ohm F-type connector
terminals
and a
converter
output terminal
as shown below.
TV rear
ANT( 75 £2) __
@@@
ANT-t
OUT
ANT-2
The ANT-1 and ANT-2 terminals
are for connecting
a VHF/UHF antenna
or cable TV system. The signal input through
ANT-1 is also output from
the OUT terminal
whenever
the RF switcher
on the TV is in the ANT-2
position.
You can switch between
the ANT-1 anti ANT-2 inputs in the
ANT 1/2 menu or with the ANT/VIDEO
button
on the TV. See page 21.
6
Advertisement
