Sylvania SRT2013 Owner's Manual page 7

|ill KH; I I_[H _.11likll H NlIfl _t1_| IH [lilll_l_ll |L_JLII_ _u
l)Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) • or • button.
3) Adjust the volume to the desired listening level using the VOL(ume) • or • button.
4) Adjust picture controls for a natural looking image. (See "pICTURE ADJUSTMENT".)
_ Nii ll[IS UI I nL_ ml| Uii ILII _
The sleep timer function enables you to shut off the power without pressing r
the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control.
2) You may change the sleep time by pressing the SLEEP StEEp 10
button on the remote control repeatedly. The timer is set u_
to 90 minutes, 10 minutes each time the SLEEP button is / To cancel the sleep timer:
pushed (The timer display counts up and sleep timer will
. • | Press the SLEEP button repeated-
be displayed on the screen when you press the SLEEP ] ly until "SLEEP 0" is displayed
button on remote control.) [ "
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
[IRO]b_ m I] [_1 uai [|]_IK_ m m KU i [|)i
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
[._a_ : Press the VOL(ume) • or • button, ]
l)Press the MENU button so that the menu
display appears on the TV screen.
2)Press the CH(annel) • or • button to point
to "CAPTION".
3) press the VOL(ume) • or • button to select
the mode you wish.
4) When done, press the MENU button to exit
the menu.
CHANNEL SET CHANNEL SET CHANNEL SET CHANNEL SET CHANNEL S_
IENG_SHIESPANOL _" [ENGLISH]ESPANOL _ [ENGLISH]ESPAr_OL _ [ENGLIS_ESpANOL _ [ENGLISH_E_PA_L
V_HFP SET UP V.CHIP SET Up V_;HIP SET Up V_CH_p SET Up V CH_P SET UP
• CAPTION [OFF] CAPTIC_N[ C11 • CAPTION [ C21 • CAPTION [ T1] _- CAp13ON [ T2i
t l
1)Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) • button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) • or • button and adjust it with the
VOL(ume) • or • button.
GAME MODE
Set to the most suitable position for TV
GAME.
[+] : ON
[-] :OFF
BRIGHT
Adjust until the whitest parts of the picture are
as bright as you prefer.
[+] : increase brightness
[-] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast
[-] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[-] : be pale color
TINT
Adjust to obtain natural skin tones.
[+] : greenish tone
[-] : reddish tone
_ : Press the CH(annel) • (_r • button,
Notes:
• In the above steps, the picture adjustment
display will disappear from the TV screen
after about 10 seconds unless you press
another button. Press the MENU and
VOL(ume) • button so that "PICTURE" is
selected. Then, press the CH(annel) • or •
button repeatedly until the display returns to
the screen.
• If you adjust the other Picture control after
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically. If you
want to set the Game mode, reset it to [ON].
[USING THE GAME BUTTON]
You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. "GAME"
appears on the TV screen.
• To exit the Game mode and external input
mode, press the GAME button on the remote
control again.
• To cancel the Game mode only, adjust the
picture control. In this case, "VIDEO" instead
of"GAME" appears on the TV screen.
• When you press the GAME button if the TV
is off, the TV turns on and will be in the
Game mode and external input mode auto-
matically.
I
[ .-I -I l-I l-I l
_FFGAME MODE I ] {'l BRIGHT {+] H CONTRAST 1+] H COLOR {÷1 {'l TINT 1÷1
o_
00fl00OEIOO000Dfl EOU0£]0fllflE]IOOD[_O0OflOO0100flfl00 0O[_flflOlD00o0n
! !