Table of Contents
Advertisement
PREPARATION
FOR USE
If you want to change the language
of the on-screen
menu, follow the procedure
below.
Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER
button without
unplugging
the power cord.
Press the POWER
button to turn on the TV.
Press the MENU button so that the menu display appears
on the TV screen.
Press the CH(annel)
•
or • button to point to "[ENGLISH]".
Select "ENGLISH"
or "ESPAIqOL"
= Spanish by using
the VOL(ume)
•
or •
button.
1_
ICTURE
CHANNEL SET
[ENGLISH]ESPANOL
I
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
• [ENGLISHIESPAI_OL
V'CHIP SET UP
CAPTION IOFF]
Press the MENU
button to exit the menu,
[|
151_i_1 | I
u 'tP._ Nil
I_[,
To preset a channel or to change a preset channel,
follow the procedure
below.
D
Press the POWER
button to turn on the TV.
D
Press the MENU
button so that the menu display appears
on the TV screen.
D
Press the CH(annel)
• or •
button to point to "CHANNEL
SET".
Then, press the VOL(ume)
•
button.
• PICTURE
CHANNEL SET
[ENGLISHIESPAfqOL
V-CHIP SET UP
CAPTION
[OFF]
PICTURE
l
P" CHANNEL SET
[ENGLISH1ESPAfqOL
V-CHIP SET UP
CAPTION
[OFF]
D
Press the CH(annel)
•
or • button to point to "AUTO MEMO".
Then, press the VOL(ume)
•
button.
The tuner scans and memorizes
all active channels
in
your area.
• The TV distinguishes
between
standard TV channels
and cable channels.
• When AUTO MEMO action is completed,
the lowest
memorized
channel
reappears
on the screen.
• When you press the CH(anneI)
•
or • button after
selecting AUTO MEMO,
the tuner will stop at the memorized
channels
only.
• The TV may recognize
TV channels
to be CATV channels
by the receiving
conditions.
In this case, try AUTO MEMO action again
in the fine receiving
conditions.
[ADD/DELETE
FUNCTION]
1)Press the MENU
button so that the menu display appears
on the "IV screen,
2) Press the CH(annel)
•
or •
button to point to "CHANNEL
SET".
Then, press the VOL(ume)
•
button.
3) Press the VOL(ume)
•
button so that "ADD/DELETE"
is selected.
4) Use the CH(annel)
•
or •
button to select the
channel you wish to put into memory
or to erase from memory.
Note:
The display
will return to the screen in about 10 seconds.
Perform
"ADD/DELETE"
function
while this display appears
on the
screen,
• Press the VOL(ume)
• or •
button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
• Press the VOL(ume)
•
or •
button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU
button to exit the menu.
l
ADD/DELETE
•
AUTO MEMO
I
PICTURE
•
CHANNEL SET
[ENGLISH]ESPA_IOL
V-CHIP SET UP
CAPTION IOFF]
•
ADD/DELETE
AUTO MEMO
IN L'liHkl I on| ll_[ll II[g_Jt.
If the power fails or is disconnected
while the TV is powered
on, the TV will turn on automatical-
ly when the power resumes.
Advertisement
Table of Contents
