Fading Out At The Desired Time - Time Fade - Sony CDP-297 Operating Instructions Manual

You can end the play lading out by designating the play duration. Once the time lade
is set, it functions twice for editing both sides of a tape. You can change discs without
cancelling this function and use it in any play mode.
3
EC3_ ®
2 '4
1
Press the EDIT/TIME FADE button three times in
stop mode, (or press it once in pause mode).
"TIME FADE" and "A" in the tape indicator displayed
in the display.
EDIT.rrlME FADE
Press the I<1< 4'< or IH_ IHH to set the desired
play duration.
0<]<_ _1<1 IH_ DE>[]
I':" " I I
5
1 2 3 4 5
r _6
L-- _L____, 6 7 8 9 10
TIME
_ 11 12
Each time you press the I<1< <1< or IH_ IH_I button,
the play duration for one side of the tape is
displayed as follows.
HALF e-._C-46 4-) C-54 <--> C-60
(23.00min) (27.00min) (30.OOmin) I
--.-- 4--)C-90<--)C-74 _ /
(45.00rain) (27.00rain)
When using the remote commander (only for
CDP-397)
To set the time for one side of the tape as you
want, press the numeric buttons.
Press [] for "0".
You need not press buttons for the seconds, unless
required.
Press the IINII (1_) button to start playing.
Before the unit enters pause mode at the set time
with "B" illuminated in the tape indicator, play starts
fading out for a specified duration (see page 18).
To start play for the other side of the tape
Press the HI (1_or II) button.
The unit enters pause mode at the set time by fading out for
a specified duration.
When this play ends, time fade is cancelled.
To cancel time fade
Press the EDIT/TIME FADE button again.
Time fade is also cancelled when the I_1< <1< (<<l)or IH_ IHH
(IH_) button is kept pressed.
To display the time remaining until the set time
Press the TIME button twice.
Whenplayendswithinthedesignated pedod
Timefadefunction i skeptactive. C hange discs andstartplay. W henthetotal p laying time
ofthediscs reaches t hedesignated p eriod, theunit pauses byfadingout.
24