Sony KP-53V16 Operating Instructions Manual page 34

Notes
• If more than one code number is listed, try enterin 8 them one
by one, until you come to the correct code for your equipment.
• In some rare cases, you may not be able to operate your non-
Sony video equipment with this remote commander. This is
because your equipment may use a code that is not provided
with this remote commander. In this case, please use the
equipment's own remote control unit.
• The code numbers for Sony equipment are assigned at the
factory as follows:
Beta, ED Beta VCRs 01
8 mm VCR 02
VHS VCR 03
MDP 04
Caution
If you leave the batteries removed from the remote commander
for approximately 30 minutes or more, the code may revert to the
factory setting. Reset the codes if necessary.
Operating video equipment
VTR1-2-3
MDP selector
(with the video control cover open)
Operating a VCR Buttons on the remote
commander
To turn on or off Press POWER
To change channels Press CH +/-
To record Press • and REC
simultaneously
To play Press 1_
To stop Press •
To fast forward Press
To rewind the tape Press
To pause Press I I
To search the picture Press _ or _ during
forward and backward playback
To change input mode Press TV/VTR
Operating a multi-disc Buttons on the remote
player commander
To turn on or off Press POWER.
To play Press
To stop Press •
To pause Press ||
To resume normal playback,
press again.
To search the picture Keep pressing _ or
forward and backward during playback
To resume normal playback,
release the button.
To search the chapter Press CH +/-
forward and backward
1
2
Set the VTR1-2-3 MDP selector according to
the video equipment you want to operate.
Use the video operating buttons on the
remote commander to operate the video
equipment.
Note
• If the video equipment does not have a certain function, the
corresponding button on this remote commander will not
operate.
34 [
Operations