Advertisement
Using the projection
TV speakers
as center
speakers
This feature allows you to enjoy the benefits of Dolby
Pro Logic by using the speakers of the projection TV as
the center speaker.
To utilize this system, you must
connect an amplifier that is Dolby Pro Logic
compatible.
Connect the speaker wires from the
amplifier's
center channel output terminals to the
projection TV's CENTER SPEAKER IN. Both right and
left terminals must be connected
to receive an audio
signal. After making the above connections,
select
"SPEAKER: CENTER" in the MODE SET menu (page
25). The left and right audio channels can be heard
through your audio system speakers.
In this connection,
adjust the volume with your
amplifier.
Notes
• Always match the speaker cord and terminal colors when
making the connections.
• Unplug the projection TV when making the connections.
If the
exposed speaker cord wires touch while the projection TV is
plugged in, the projection TV may short-circuit and be
damaged.
• Do not pull on the speaker cords.
• Always turn off the amplifier's power before connecting to the
CENTER SPEAKER IN terminals.
to right - terminal
(Rear of projection TV)
IN
OUT
V_
,IIVLDEO ZI VIDl_O3 vlOEO _ uO_TO_
1®1® ®l®
to left + terminal
Connect the other end of the cords
to the input
terminals
of the
corresponding
speakers
in the same
way as shown
above.
0
AUX
to center
output
Speaker
cords
Dolby*
Pro Logic-compatible
amplifier
* Manufactured under license from Dolby Laboratories
Licensing Corporation. Additionally licensed under one or
more of the following patents; U.S. numbers 3,632,886,
3,746,792 and 3,959,590. "Dolby" and the double-D symbol [13
are trademarks of Dolby Laboratories Licensing Corporation.
Getting
Started
11
Advertisement
