Specifying The Next Disc To Play; Locating A Specific Track Or A Point In A Track - Sony CDP-CX235 Operating Instructions Manual

Specifying the Next Disc to
Play
You can specify the next disc to play while playing a
disc in Continuous or I DISC Shuffle Play mode.
While playing a disc, turn the JOG dial. "NEXT DISC"
appears in the display and the disc number or Disc
Memo (see page 18) changes as you turn the JOG dial.
When the disc number or Disc Memo you want
appears in the display, stop turning the JOG dial.
ALL DtSCS _O NF3Cr
..... $C C01 ii _ _ _8c
ISC-38K- -
L_
Next disc number or
the Disc Memo
After the current disc is played, the next disc you have
specified starts playing.
If you want to skip to the next disc right away, push
the JOg; dial while playing the current disc.
To cancel the disc you have specified
Press CONTINUE twice.
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the D:a<a/Dg>_ (AMS: Automatic Music Sensor)
buttons or number buttons on the remote. You can also
locate a specific point in a track while playing a disc.
_<t<a/c>!>_
_C::::2
[] CEzizi3
"t=:222_ 112222_
CZDCD CZ3
CD CD CD
CD CZ) CD
OOO
Number _------ 0 0 0
buttons 0 0 0
>10 _------
0 <::Z_ CZ)
i-_1 r_q
To locate Press
the next or Dg>a repeatPdly until you find the
succeeding tracks track
the current or Fvt<_repeatPdly until you find the
preceding tracks track
a specific track The number button of the track on the
directly _ remote
a point in a track _ (backward)/lD_ (forward) on the
while monitoring the remote and hold down until you find
sound _ the point
a point in a track _ (backward)/lD_ (forward) on the
quickly by observing remote and hold down until you find
the display iT the point during pause. You will not
hear the sound during the operation.
When you directly locate a track numbered over 10 [_;i
Press >10 first, then the corresponding number buttons
on the remote.
Note
If "- OVER -" appears in the display, the di_ has reached the
end while you were pressing _ on the remotP. Press Fvt<_ or
on thP remote to go back.
13