Use Auto Program - Sony KP-61V45 Operating Instructions Manual

Additional Information
If the problem persists after trying the methods below,
contact your nearest Sony dealer.
No picture (screen not lit). no sound
Make sure the power cord is connected
securely.
Operate with the buttons on the projection TV.
Insert the batteries in the remote control with
the correct polarity.
Replace the batteries with new ones if they are
weak.
Check to see if the TV/VIDEO setting is correct:
when watching TV, set to TV, and when
watching video tapes, set to VIDEO1, 2, or 3.
Try another channel. It could be station trouble.
Perform AUTO SET UP again using the SETUP
button to return to the factory preset condition.
(page 17)
Poor or no picture (screen lit), good sound
Adjust PICTURE in the VIDEO menu. (page 26)
Adjust BRIGHTNESS in the VIDEO menu.
(page 26)
,_ Adjust convergence. (page 19)
,._ Check antenna/cable connections. (page 6)
Perform AUTO SET UP again using the SETUP
button to return to the factory preset condition.
(page 17)
Remove objects from the front of the projection
TV.
Good picture, no sound
Press MUTING so that "MUTING" disappears
from the screen. (page 22)
Check the MTS setting in the AUDIO menu.
(page 30)
•"_ Make sure SPEAKER is set to ON in the AUDIO
menu. (page 31)
•"_ Perform AUTO SET UP again using the SETUP
button to return to the factory preset condition.
(page 17)
No color
Adjust the COLOR in the VIDEO menu. (page
27)
Confirm that black and white program is not
being broadcast.
Perform AUTO SET UP again using the SETUP
button to return to the factory preset condition.
(page 17)
42"EN I
Additional Information
Only snow and noise appear on the screen
Check the CABLE setting in the SET UI' menu.
(page 20)
Check the antenna/cable connections. (page 6)
_1_ Make sure the channel is broadcasting
programs.
Press ANT to change the input mode. (page 23)
Dotted lines or stripes
Adjust the antenna.
Move the projection TV away from noise
sources such as cars, neon signs, and hair-
dryers.
Double images or ghosts
Use a highly directional outdoor antenna or a
cable (when the problem is caused by
reflections from nearby mountains or tall
buildings).
Cannot operate menu
If the item you want to choose appears in gray,
you cannot select it. Press TV/VIDEO
correctly.
,,_ Check the CABLE setting in the SET UP menu.
(page 20)
Cannot receive upper channels (UHF) when using an
antenna
Make sure CABLE is OFF in the SET UP menu.
(page 20)
Use AUTO PROGRAM to add receivable
channels that are not presently in projection TV
memory. (pages 17, 21)
Cannot receive any channels when using
cable TV
,._ Make sure CABLE is ON in the SET UP menu.
(page 20)
•'_ Use AUTO PROGRAM to add receivable
channels that are not presently in projection TV
memory. (pages 17, 21)
Remote control does not operate
•_ Batteries could be weak. Replace the batteries.
(page 16)
Make sure the projection TV's power cord is
connected securely to the wall outlet.
Press TV (FUNCTION) when operating your
projection TV.
Are fluorescent lights too close to the projection
TV? Move them at least 3-4 feet away from the
projection TV.
Cannot gain enough volume when using a cable box
•._ Increase the volume at the cable box. Then press
TV (FUNCTION) and adjust the projection TV's
volume.
Projection TV malfunctions when using the S-Link
function
Make sure the projection TV's power cord is
connected securely to the wall outlet.
Check the S-Link connection. (page 14)
The projection TV needs to be cleaned
Clean the projection TV with a soft dry cloth.
Never use stro___g solvents such as thinner or
benzine, which might damage the finish of the
cabinet.