Sony KP-61V45 Operating Instructions Manual page 38

_on,c pl_g,,tul> ,ut: bit_ad,,u,,t with (Zaptiol_ Visioll. I O
display Caption Vision, select either CC1, CC2, CC3,
CC4, TEXT1, TEXT2, TEXT3, or TEXT4 from the menu.
CC1, CC2, CC3, or CC4 shows you on-screen version of
the dialogue or sound effects of a program. (The mode
should be set to CC1 for most programs.) TEXT1,
TEXT2, TEXT3, or TEXT4 shows you on-screen
information presented using either half or the whole
screen. It is not usually related to the program.
1
2
o®o ]
Press MENU.
Press t or • to select _, and press _.
CAPTION VISION
I_ TEXT t
TEXT 2
TEXT 3
TEXT 4
_MENU
IUse _]_ [_D Exit
I
3
Press • or 4 to select the caption type, and
press _.
[]C ,O.V,S,ON
Use _ _ Exit
4 Press MENU to return to the original screen.
To display Caption Vision
Press DISPLAY. (See page 23 for details.)
Notes
• Poor reception of TV programs can cause errors in Caption
Vision and XDS.
Captions may appear with a white box or other errors instead
of a certain word.
• XDS, Caption Vision, and the status display cannot be used at
the same time.
• For details on XDS, see page 23.
38"EN I Operations
You L,,_ u_, the >upplied rcm_t_, ct)ntrol to t_pt'ratc
Sony or non-Sony video equipment that has an infrared
remote sensor. For this operation, set the
manufacturer's code number.
Setting the manufacturer's code
CODE SET--
Oc_c9
c_ qD C:__
CZ:) G_ (:_) (_i:)
0 0 O0
0 ®® ®
CD CD O0
N
VTR/DVD
(FUNCTION)
--0- 9 buttons
--ENTER
Press the CODE SET, VTR/DVD (FUNCTION), and
0 - 9 buttons to enter the manufacturer's code
number (see the chart on page 39), then press
ENTER.
For example, to operate a Sony 8 mm VCR,
press CODE SET, VTR/DVD (FUNCTION), 3, 0, 2,
and ENTER.
FUNCTION
÷