Specifications - Snapper LT-125 Series Operator's Manual

ENGINE:
23 HP* Briggs & Stratton
Make Briggs & Stratton
Model Extended Life Series
TM
(ELS)
Horsepower 23 @ 3600 rpm
Displacement 44 cu in. (725 cc)
Electrical System 12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity 64 oz (1,9 L) with filter
CHASSIS:
Fuel Tank Cap.
Rear Wheels
Front Wheels
Capacity: 3.5 Gallons (13,2 L)
Tire Size: 20x 10.0-8
Inflation Pressure: 10-12 psi (,68 bar)
Tire Size: 15x 6.0-6
Inflation Pressure: 12-15 psi (0,82-0,96 bar)
TRANSMISSION:
K46
Type
Hydraulic Fluid
Speeds
@ 3400 rpm
Continuous Torque
Output
Drawbar Rating
Maximum Weight
on Axle
Hydrostatic Tuff Torq K46
lOw 30 Premium Engine Oil
Forward: 0-5.5 MPH (9,0 kin/h)
Reverse: 0-3.0 MPH (4,6 kin/h)
170 ft-lbs (230,5 Nm)
227 Ibs (103 kg)
675 Ibs (306 kg)
DIMENSIONS:
23hp Tractor
w/42" Mower Deck:
Overall Length 71" (180 cm)
Overall Width 48" (122 cm)
Height 44" (112 cm)
Weight 532 Ibs (242 kg)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM;
horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among
other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on
which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas
engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature,
humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton
may substitute an engine of higher rated power for this Series engine.
Maintenance Items
Many convenient and helpful service and maintenance
items are available from you authorized dealer. Some of
these items include:
Engine Oil
Touch-Up Paint
Grease Gun Kit
8 oz Grease Tube
Tire Sealant
Degrimer/Degreaser
Gas Stabilizer
Replacement Parts
Replacement parts are available from your authorized
dealer. Always use genuine Snapper Service Parts.
Technical Manuals
Additional copies of this manual are available, as well as
fully illustrated parts lists. Technical manuals can be
downloaded from www.snapper.com.
3O