Sharp AQUOS LC-32DV28UT Operation Manual page 23

Watching TV
Selecting the digital audio language
When two or more audio languages are included in a
digital signal, you can select one of the audio languages.
1 In digital TV mode, press AUDIO and the "Audio
Language" menu screen displays.
2 Press A/T or 0-6 to select your desired language.
3 Press EXIT to return to the normal screen.
View mode for HD programs
Stretch mode is available for HD programs.
Suitable for viewing wide-screen 1.78:1 aspect-ratio
programs. When viewing 1.85:1 programs, the stretch
mode will still show very thin black bands at the top
and bottom of the screen.
Labeling channels
,, Digital audio is active only when receiving digital
boardcasting, not when receiving analog boardcasting.
viewmode for 4:3programs
Press VIEW MODE.
,, The View mode menu displays.
, The menu lists the view mode options selectable for
the type of video signal currently being received.
Press 0-3 or ,_/T to select each view mode directly
while the View mode menu is still on the screen.
, Each time ViEW MODE is pressed, View Mode item
toggles.
, You can also select View Mode item by pressing A/T.
" You can sequentially select a view mode that has its
own aspect ratio.
Side Bar:
Suitable for viewing conventional
4:3 programs in their normal
format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
To create channel labels
1 Select a channel you want to label.
2 Press TV MENU, then press A/T to select
"Channel", then press _ or ENTER.
Press A/T to select "Ch Label", then press _- or
ENTER. The Ch Label menu will appear.
3 Press _/_ to select a channel you want to label,
then press T.
Ch_,,,,_N_mbe, IS 1
L_belC_e_,
4 Press 4/m,- repeatedly until the character you want
appears in the first space.
The characters rotation as follows:
0 ""9 <-->A'' "Z <-->- , ,0 @/+=- <-] 1
• SPACE <
If the character which you desire appears, press
ENTER. Repeat this step to enter the rest of the
characters.
When you finish inputting the label name, press
ENTER.
5 Repeat steps 1-5 for other channels. You can
assign a label to each channel.
6 Press EXIT to return to the normal screen.
Stretch: To
This mode is useful for 1.78:1 DVDs.
When viewing 1.85:1 DVDs, 1
stretch mode will still show very
thin black bands at the top and 2
bottom of the screen.
Dot by Dot (for PC/HDMI mode
only):
Detects the resolution of the signal
of the image and it will be shown
on the screen with same amount of
pixels.
3
4
5
erase channel labels
Select a channel with a label which you want to
remove.
Press TV MENU, then press A/T to select
"Channel", then press _ or ENTER.
Press A/T to select "Ch Label", then press _- or
ENTER to display the Ch Label menu.
Press A/T to select "Label Clear". Press _- or
ENTER.
Repeat steps 1-4 to erase other channel labels.
Press EXIT to return to the normal screen.
• You can enter to the same menu screen from "Picture" menu.
• You cannot select "Side Bar" and "S.Stretch" when a 720p, 1080i
or 1080p signal is being input.
• Some High Definition and/or Digital broadcasts may not allow you
to change the picture size.
• In PC/HDMI Mode, only the "Side Bar", "Stretch" and "Dot by Dot"
picture size features are available. In PC Mode (WXGA), only the
"Stretch" and "Dot by Dot" picture size features are available.
(_) = 22