Connecting To External Equipment; Player Or Hd Language Box - Sharp AQUOS LC-32DV28UT Operation Manual

Connecting to External Equipment
You can connect many types of external equipment to your TV/DVD. To view external source images, select the
input source from INPUT on the remote control unit or on the TV/DVD. (See page 15.)
For connecting the TV/DVD to external equipment, use commercially available cables.
* To protect equipment, always turn off the TV/DVD before connecting any external equipment.
* Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
[] When using HDMI cable (iNPUT 4 or 5):
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and
video signals using a single cable.The HDMI terminal supports high-resolution video input.
* Blu-ray disc player
* DVD player
* HD cable/satellite set-top box
Rear of the TV
HDMt-certified cable
(Illustration is LC-28DV28UT.)
* Supported Audio format: Linear PCM (sampling rate 32/44.1/48kHz) and Dolby Digital.
* Digital audio cannot be output when the HDMI input.
[] When using DVI-HDMI conversion cable (iNPUT 4):
* Biu-ray disc player
* DVD player
,, HD cable/satellite set-top box
Rear of the TV
DVI-HDMI conversion cable I _
0 3.5 mm stereo minijack cable
( PC/
m
(Illustration is LC-28DV28UT.)
* When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVI-HDMt conversion cable to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/
HDMt terminal and set "HDMI1 Audio" to "DVI". (See page 28.)
_=16