Test Run - Grizzly G0637 Owner's Manual

Test Run

Troubleshooting Page 50
To test run your dust collection system:
1.
2.
3. Power Supply
4.
Figures 56
Note: For the Model G0638, make sure the
EMERGENCY STOP button is popped out by
twisting the knurled knob clockwise.
Figure 56.
Page 12
5.
ON
OFF
6.
Troubleshooting
Troubleshooting
7.
8.
Step 7
9.
Note: For proper operation, the impeller
inside the blower housing must be rotating
counterclockwise. Since the motor and impel-
ler are directly connected, you will verify in
the next step that the motor is rotating in the
correct direction.
Keep in mind that if the motor is rotating in
the incorrect direction, the dust collector will
still operate but with drastically reduced per-
formance.
If any part of your body contacts the spin-
ning impeller, severe cutting or amputation
injuries could occur. Always keep well away
from the impeller and never use any tools
near the impeller when the machine is con-
nected to power.
OFF
Page 50