Locating the outdoor unit
• Locate the outdoor unit where the air
flow around it is not obstructed.
• Ensure that the base is level and does
not exceed the maximum slope of 5
degrees.
• Secure the unit to a base with anchor
bolts to reduce vibrations and noise.
• Place the unit with access space for
servicing and maintenance.
• Do not install the unit near a heat
source, steam source and flammable
gas.
• Ensure that the minimum distances
around the unit are maintained as
shown on the right.
• For Heatpump unit, mount the unit
above the snow line, if possible.
OUTDOOR UNIT INSTALLATION
At
least
40cm
At least
60cm
At
least
60cm
At least
10cm
At least
60cm
C12